Top

• For Ultra-Lite SLT Skis
  • Available in designs for trail riding/packed snow conditions and loose snow/mountain riding.
  • Sold in pair.
• For Ultra-Lite Skis
  • Quality carbide runners, built to SLP specifications by  Roetin, are  an exact fit for Ultra-Lite skis.
• 5" Carbide
  • Bar features 5" of 90 degree carbide, with front and rear wear pads and hardweld filler in non-carbide areas.
  • Sold in pairs.

• 6.25" Carbides
  • Feature 6.25" of 60 degree carbide, front and rear wear pads and hardweld filler between carbide surfaces.
  • Sold in Pairs.
• For Tri-Keel Skis
  • 5" 90 degree carbide is design for general trail riding.
  • 6.25" 60 degree carbide is designed for aggressive trail riding and racing.
  • Outer runners come in 4- or 5-bolt design; made from tough chromoly for long wear.
  • For use with all Tri-Keel skis.

Top

• For use with SLP's Powder Pro, Ultra-Lite SLT, Tri-Keel I and Tri-Keel II skis.
• Sold individually; order two for a pair.

• If bracket is supplied without hardware, the stock bolt, nut or damper is used.
• Chromoly construction; available in black

Top

• Provide the ultimate in loose-snow performance for maximum flotation and precise steering control.
• Patented bottom design with a multilevel keel.
• Only the lower keel contacts the snow in packed-snow conditions; shares design features with SLT skis to provide precise steering with reduced darting.
• Compaction Control Technology (CCT) uses powder control wings to direct snow under the ski, where it is compacted to add ski lift.

• Deep-snow steering ability is increased along with low-speed mobility.
• Add front-end lift, which reduces drag on front end components such as the belly pan, bulkhead, front suspension and steering components.
• Recommended for mountain/powder riding and snocross-type conditions.
• Sold each; order ski, mount shoe and carbides separately.
• Upper keel comes into play in deep powder and loose snow; sidewall adds steering control.

Top

• Straight Line Tracking keel design provides sure tracking even on frozen, rutted trails.
• Lightweight and durable (5.5 lb. with handle loop, mount shoe and keel blade).
• SLP's patented Rocker Keel design.
• Tuned flexibility with maximum strength.
• Even less steering effort than the original Ultra-Lite Ski
• Available in a range of colors, with black handle loop.
• Design to accept SLP's chromoly keel blades and carbides for maximum reduction of darting.

• Skis sold each; order two for a pair
• Order ski, mount shoe and carbides separately.
  • Order trail riding/packed snow carbides and keel blade (5" carbide part # 35120; keel blade part# 35121; see SLP runners and keels) for best trail performance; this reduces tracking and darting with minimal arm effort.
  • Order loose-snow/mountain runner for reduced pushing in corners - (90 degrees carbide part# 35122 or 60 degree carbide part# 35123; see SLP runners and keels.

Top

• Exact replacement ski bottoms for all of SLP's Ultra-Lite skis.
• Much less expensive than buying complete assemblies if only bottoms are damaged or worn.
• An easy way to customize colors.

• Come with all necessary hardware.
• Sold each